There are multiple air abrasion units available in the market; some really cheap and  others insanely expensive. And as a Prosthodontist, I would always wonder ‘Kaunsa  Kharidu?’  

Prophylaxis handpieces that help remove stains are relative modern, and hence heavy  on the pocket. Regardless of brand and price, most traditional units suffer with clogging  issues and inconsistent flow of powder. Such inefficiencies not only slow down  procedures but also compromise precision and patient comfort.  

But all this is talk of the past, as we offer you the next-generation handpiece with a  genius design twist that incorporates an independent water nozzle; allowing seamless  dry and wet use.  

Whether you’re performing minimally invasive cavity preps or sandblasting crowns, or  gently removing stains; this dual-mode device shall enhance your workflow, improve its  efficiency, and deliver precise, comfortable, and predictable results.  

Note: If you are looking for only an air-abrasion handpiece, then check out AeroJet: Air Abrasion Master (Dry)

You can click here if you need help choosing between the two. 

Dry Mode (Air Abrasion)  

• Enamel and dentin etching prior to bonding 
• Removal of residual cements from crown interiors 
• Pre-treatment of zirconia and metal surfaces for improved adhesion 
• Surface roughening for composite repairs 
• Removing adhesive remnants after debonding orthodontic brackets    

Wet Mode (Prophylaxis)  

• Supragingival stain and plaque removal 
• Subgingival biofilm disruption
• Finishing enamel surfaces post scaling and root planing
• Gentle polishing of restorations and exposed root surfaces 
• Final surface cleansing before adhesive procedures

• Dual-mode versatility – Perform air abrasion and polishing with one device. 
• Independent water nozzle – Eliminates clogging and ensures smooth transitions. 
• Two-powder compatibility – Use aluminum oxide for prep, bicarbonate for polishing. 
• Clog-resistant design – Maintains steady flow, reduces maintenance time. 
• Reduced aerosol dispersion – Water mist contains powder, enhancing safety. 
• Precision spray pattern – Enables conservative and targeted treatments. 
• Lightweight and ergonomic – Designed for all-day comfort and better control. 
• Built for multi-specialty use – Ideal for both restorative and hygiene applications. 

Step 1: Fill the powder chamber with your desired aluminum oxide grit. 

Step 2: Attach the appropriate angled head (maxillary or mandibular) based on the site of treatment.  

Step 3: Adjust air pressure to the recommended range (typically 40–80 psi). 

Step 4: Position the nozzle 2–5 mm from the surface to be treated.  

Step 5: Activate the foot control and press the button on the side of the handpiece to begin abrasion; use steady, controlled movements.  

Step 6: Stop and inspect the treated area; repeat if additional prep/polish is needed.  

Step 7: After every use, flush the handpiece with air and clean the nozzle with the provided pin, so as to prevent accidental clogging.  

• 1 x Bi-Mode Jet Handpiece (Dry + Wet use)  
• 2 x Powder Dispenser Bottle  
• 1 x Cleaning Pin  
• 1 x Protective Storage Box  
• 1 x User Instruction Manual